Dropco Multilub Systems Private Limited

MODEL DMT -002 (No. of outlets-2)

MODEL DMT -003 (No. of outlets-3)

MODEL DMT -004 (No. of outlets-4)
The Take OFF metering injectors are made of zinc (pressure die casting) material.

The Take OFF metering injectors works on a different principle unlike the normal metering injectors which discharges the oil when pump is ON. In this case when the pump is ON the TAKE OFF injectors are charged and the spring loaded piston ejects (Pin) out thereby indicating TAKE OFF injectors are charged. When the pump stops the oil is flushed out from the injectors to the lubricating points and the piston goes back. A non return valve in each injectors does not allow oil to go back.

DMI-1 with Dosage 0.01 cc, 0.03 cc, 0.05 cc, 0.10 cc, 0.16 cc Per Stroke

DMI -2 With Dosage 0.25 cc, 0.40 cc Per Stroke.

DMI -3 With Dosage 1.00 cc, 1.60 Per Stroke

Note: Above metering injectors are available in M.S. as well as brass with honed bore Nitrile rubber parts & accurate dosage.

DFSH -01, 02 DFSV -01,02 For sensing min. Oil level electrically with NO or NC (Top ON, Bottom ON) contact. Available in Horizontal & Vertical mounting type. (220 V AC / 24 V DC 1 Amp) (All models of float switches are potential free)

Dropco developed a special heavy duty and preceise grease injector to meet industries need for proper lubrication.

Plunger Pump Element Assembly

Persistently marching in today's competitive market, our company is recognized as one of the well-established manufacturers and exporters of Plunger Pump Element Assembly. Our wide range of element assembly is stringently checked on various quality parameters so that our clients receive faultless range from us. Extensively demanded in various industries, this Plunger Pump Element Assembly is well appreciated in the market for its features such as sturdy construction, impeccable performance and long operational life.

Key Features of Plunger Pump Element Assembly

• Made from quality grade raw materials
• Offers efficient working and long service lif

Models DPB - 4555-N-0
Models DPB - 6080-N-0 * N = Number of middle elements.
* O = Number of outlet points.

Dropco manufactures wide range of Oil , oil mist lubrication systems, air oil mist lubrication system, lubricating systems and grease mist lubrication system as per user requirements.The performance of these systems are excellent. The company has developed a lots of special mist lubrication system as per customer's requirement. These systems are suitable for spray lubrication. The ratio of mixture of Air & oil at the outlet can be adjusted as per requirement.

Dropco manufactures wide range of Oil , oil mist lubrication systems, air oil mist lubrication system, lubricating systems and grease mist lubrication system as per user requirements.The performance of these systems are excellent. The company has developed a lots of special mist lubrication system as per customer's requirement. These systems are suitable for spray lubrication. The ratio of mixture of Air & oil at the outlet can be adjusted as per requirement.

DPS -830, DPS-320, DPS-020 Pressure range 8-30 Kg/ Cm² (adj.)
Pressure range 3-20 Kg/ Cm² (adj.)
Pressure range 0-20 Kg/Cm² ( adj.)

(Suitable For Lubricating / Hydraulic. Oil, 220 V AC Amp., Potential Free)