OIL RECIRCULATING SYSTEMS

Product Details:

Model DBr-GP-25
Reservoir Cap. - 25 Kg.
Discharge - 300 to 400 gms per minute, Max. Pr.-125 Kg/Cm². with rubber hose, Grease gun & Trolley mounted..
DBr-GP-50
Reservoir Cap. - 50 Kg
Discharge - Discharge-300 to 400 gms per minute, Max. Pr.-125 Kg/Cm². with the rubber hose, Grease gun & Trolley mounted

Above mentioned models is a pneumatic operated type of barrel grease pump. 5-7 kg/cm² air pressure is required for proper working of this pump. The pressure plate or dead weight has been provided in these pumps to avoid the air gap. These pumps are suitable for transferring the grease and pressurised filling of different pump i.e pneumatic operated grease pump model DPn-GP 1500- 10 & grease feeder model DGF - 250, DGF- 500 and radial lubricators.

Product Details:

Model DB-GP-200
Reservoir Cap. - 200 Kg,
Discharge - 300 to 400 gms per minute, Max. Pr.-150Kg/Cm², Air input pressure 5-7 Kg/Cm². with rubber hose & grease gun. This pump is suitable for transferring the grease with greater discharge.

NOTE:- Drum shown in the figure is not the part of an item. A mobile trolley can be provided with the additional cost if required by the customer. Remove the pressure plate or dead weight outside from the bottom of the reservoir in case of empty of drum and insert the pressure plate only with the pump to the new drum filled with grease.

Product Details:

'DROPCO' design & Developes special Oil Recirculating Lubrication System as per users requirement. The system which has been shown in figure has equipped with Pressure switch, Float switch, Temp. Indicator, Heat exchanger, Pressure gauge, Flow switch, Duplex filter, Drain valve, Ball valve, Heater element Electronic control panel etc.

Note :- specification should be provided by customers as per their requirement.

Product Details:

We are engaged in the business of manufacturing and exporting of best quality Oil Lubrication System.

Product Details:

Dropco has developed different types of oil recirculating systems as per design provided by the customer's This normally contains main oil tank (reservoir), elctric motors, pumps, pressure switch, float switch temperature indicator, heat exchanger, pressure gauge, flow switch strainers, duplex filter, drain valve, ball valve, heating elements and electronic control panel. 5000 cc (5kg),
Note - Specification should be provided by customers as per their requirement.

Additional Information:

• Item Code: circulating

Product Details:

Reservoir Cap. - 3Ltr, Motor, 12kw.415v AC
Discharge - 1Lpm,
Pr. Setting - 12-15 kg / cm²with pressure switch and float switch (vertical / horizontal )
Optional - Electronic lubrication controller

Product Details:

MANY TIMES OF LUBRICATING PUMP WE ARE MFG.

Additional Information:

• Production Capacity: AS PER CUSTOMER NEED
• Delivery Time: ONE WEEK
• Packaging Details: 01